Product Description

ROLL CAGE BUNG KIT

6 Piece Kit
Build your own custom roll cage
Exclusive kit with four drilled cage bungs (to simplify wiring)

• Machined from steel bar (not cast iron)
• Fits 1.75" OD x 0.095" wall tubing
• Chamfered for superior weld adhesion and lower bead profiles
• Includes four (4) cage bungs drilled for routing electrical wires through roll cage tubes for hidden wiring and two (2) un-drilled cage bungs
• Fits A, B & C-pillar for 2-seat RZR models:
  2014 & newer RZR XP 1000
  2015 & newer RZR XP 1000 High Lifter Edition
  2016 & newer RZR XP Turbo
  2017 RZR XP 1000 Gold Matte LE
  2018 & newer RZR XP Dynamix
  2018 & newer RZR XP 1000 Trails & Rocks Edition
• Fits A, C & D-pillar for 4-seat RZR models:
  2014 & newer RZR XP-4 1000
  2015 & newer RZR XP-4 1000 High Lifter Edition
  2016 & newer RZR XP-4 Turbo
  2018 & newer RZR XP-4 Dynamix
• Includes all necessary hardware for mounting
• Made in USA

Whether you're building your own custom roll cage, or having a local chassis-shop do it for you, you will need a set of roll cage bungs to mount the cage to the RZR's frame. Custom cages for the RZR are very popular for many reasons, including: improved safety, lowered roof height (to fit into toy haulers & trailers), customized appearance and to meet UTV racing safety regulations

Thunderhawk Performance now offers roll cage bung kits for the do-it-yourselfer which feature strong machined steel construction (not weak cast iron) and are chamfered for superior weld adhesion and lower weld-bead profiles. Designed to fit tubing with 1.75" OD x 0.095" wall thickness, so you can build a safe roll cage for recreational use or to meet UTV racing requirements without adding unnecessary weight.

We've all seen RZR's with electrical wiring tie-wrapped to the roll bar to reach the roof. Although this works, it's ugly and it leaves these wires exposed to damage. Wiring electrical accessories and lights on the roof is common as people add light bars, stereos, interior lighting, overhead mounted accessories and the S&B Particle Separator. Many RZR cage bung kits do not include cage bungs drilled for routing electrical wires through roll cage tubes for hidden (and protected) wiring, while others include just two of these drilled cage bungs. With just two drilled cage bungs, you must run all wiring all up to the front A-pillar and then try to fit all the wires through the two drilled bungs. To solve this problem and make life easier for both current and future electrical add-ons, Thunderhawk Performance offers this Roll Cage Bung Kit with four cage bungs drilled for wiring. This allows you to use two drilled bungs at the front A-pillar and two more at the rear C-pillar (on 2-seat RZR) or D-pillar (on 4-seat RZR), which makes the job much easier when wiring your electrical accessories.

This is a 6-piece kit that includes four (4) drilled cage bungs, two (2) un-drilled cage bungs and all necessary hardware for mounting. Fits 1.75" x 0.095 steel tubing. Made in USA.

CA Warning: Cancer or Reproductive Harm Prop 65