Product Description
FRONT 2" RECEIVER HITCH - 2024+ RZR XP
- Heavy duty, frame-mount design offers superior strength
- Compact design does NOT extend the length of the RZR
- Front tow point for max maneuverability
- Great for installing accessories or as a recovery/tie-down point
- 3/16" and 1/4" steel construction
- Receiver tube with reinforcing collar will not deform
- 125 lb tongue weight rating
- Durable black powdercoat finish
- Made in USA
STRONG & COMPACT DESIGN
This Thunderhawk front hitch features 3/16" & 1/4" steel construction throughout, uses a reinforced, automotive-grade receiver tube for strength & durability and bolts directly to the frame for unsurpassed strength. The receiver tube sits behind the factory-installed front bumper and the leading edge of the front tires, so this hitch will not use any additional garage or trailer space
CONVENIENCE & FUNCTION
Easily and quickly maneuver a trailer into even the tightest spots with this front-mount hitch. Seriously, until you've used one, you will never appreciate how great they are. When you're not moving a trailer, this hitch is great for mounting accessories or as a recovery/tie-down point.
WHY CHOOSE THUNDERHAWK PERFORMANCE ?
Well, with over 20 years serving the side-by-side UTV community, there are many great reasons to buy Thunderhawk Performance products. It's probably easiest to START HERE for answers to the most common questions, or feel free to give us a call anytime to learn everything you want to know.
Fitment and Installation
FITS :
- 2024 & newer Polaris RZR XP 1000
- 2024 & newer Polaris RZR XP-4 1000
- 2026 & newer Polaris RZR XP S 1000
SPECIAL FITMENT NOTES
- Does NOT fit any RZR equipped with a winch
- Does NOT fit 2015-2023 RZR XP 1000 or XP-4 1000 -
- Does NOT fit 2014 RZR XP 1000 or XP-4 1000
- Does NOT fit 2018 - 2021 RZR XP Turbo S (72" wide model)
- Be sure to verify fitment with any front bumpers before purchasing. The location of the receiver tube (see photos) must be unobstructed. The bumper tubes must also be at least 13" apart beside the receiver tube in order to allow for the use of a common hitch pin (this can be reduced to approx 10" between tubes if using a 3.5" long bolt).
- This hitch is NOT designed for snow-plow mounting. Do NOT use with receiver-mount snow plows.
COMPLETE KIT
- Includes all necessary hardware and illustrated step-by-step instructions
- Installs easily in about 60 minutes
INSTALLATION INSTRUCTIONS
CA Warning: Cancer or Reproductive Harm Prop 65
