Product Description
Heavy-Duty Double-Shear Rear Receiver Hitch for Polaris RZR
Patent-pending double-shear design boosts strength & protects your frame.
Made in USA | Reinforced 2″ receiver | Ships fast
Why This Hitch Is Best-In-Class
- True double-shear mounting plate increases strength over stock design by 100%
- Transfers towing load directly to frame — eliminates radius rod & frame damage
- 150 lb tongue weight rating with reinforced 2″ receiver tube
- Twin tow hook points + differential access for quick maintenance
- Compatible with stock and many aftermarket radius rods
Product Highlights
Thunderhawk’s double-shear design replaces the weak four-bolt radius rod plate and mounts directly to the frame. This means towing loads are distributed properly — reducing flex, stopping “egging-out” of bolt holes, and strengthening both frame and suspension.:contentReference[oaicite:0]{index=0}
- Heavy-duty construction with powdercoat finish
- Easy differential & transmission service access
- Installs in ~45-60 minutes
- Made in the USA
- Fits Polaris RZR XP1000 & XP Turbo (2014-2023)
Fitment & Compatibility
Works with stock and many aftermarket radius rods — verify radius rod width when ordering. Note: Not compatible with Polaris rear bumper or certain aftermarket frames without modifications.:contentReference[oaicite:1]{index=1}
- Fits 2014-2023 Polaris RZR XP1000, XP-4 1000, XP Turbo & XP-4 Turbo
- Check model options menu for specific fitments
Customer Reviews
★★★★★ “Very solid hitch — beefy and easy install.” — Bob
★★★★★ “Perfect fit, excellent instructions.” — Kevin
Get the Strongest Hitch for Your RZR
Fast shipping • Quality guaranteed • Lifetime support
Fitment and Installation
FITS :
- 2014 - 2023 Polaris RZR XP 1000
- 2014 - 2023 Polaris RZR XP-4 1000
- 2016 - 2021 Polaris RZR XP Turbo
- 2016 - 2021 Polaris RZR XP-4 Turbo
SPECIAL FITMENT NOTES
- Fits with stock, and most aftermarket radius rods -
- Because the Thunderhawk Double-Shear Hitches feature direct frame mounting, fitment of these hitches are affected by the width of the
radius rods (where the bolt passes through at the frame end). Polaris has used two different styles of factory-installed radius rods on the RZR
- their standard, straight radius rods (1 3/8" width) and their High-Clearance radius rods with spacers (1 3/4" total width). Thunderhawk
Performance makes hitches to fit both. If you have either of these stock radius rods, we know what you need - Just select your vehicle &
options and we'll send the correct hitch for your RZR. There are also dozens of aftermarket radius rods which may be 1 3/8" wide, 1 3/4" wide or
some other odd-ball dimension. To assure that you receive the correct hitch for any RZR that is equipped with aftermarket radius rods, we ask
that you verify the measurement of your radius rods (see photo above) before ordering.
- Does NOT fit with with the Polaris rear bumper or aftermarket frame-mount bumpers with low cross tubes (see photos above) -
- Does NOT fit with aftermarket bumpers using four-bolt radius rod plate for lower mounting -
- If you have one of the light-duty brush-guard bumpers that have a lower mount that uses a four-bolt plate to replace the factory radius rod
plate, then you can't fit any hitch (you probably also want to get rid of that bumper before you hit something and damage your rear suspension).
- Does NOT fit RZR XP Turbo S (72" wide model) or RS-1 (single-seat) -
COMPLETE KIT
- Includes all necesary hardware and instructions
- Installs easily in about 45-60 minutes
INSTALLATION INSTRUCTIONS
CA Warning: Cancer or Reproductive Harm Prop 65
