ROLL CAGE BUNG KIT
6 Piece Kit
Build your own custom roll cage
Exclusive kit with four drilled cage bungs (to simplify wiring)
- Machined from steel bar (not cast iron)
- Fits 1.75" OD x 0.095" wall tubing
- Chamfered for superior weld adhesion and lower bead profiles
- Includes four (4) cage bungs drilled for routing electrical wires through roll cage tubes for hidden wiring and two (2) single-bolt rear cage bungs
- Fits A, B & C-pillar for all RS-1 models
- Includes all necessary hardware for mounting
- Made in USA
Whether you're building your own custom roll cage, or having a local chassis-shop do it for you, you will need a set of roll cage bungs to mount the cage to the RS-1's frame. The RS-1 uses unique cage bungs that are different from the RZR. Custom cages for the RS-1 will be popular for many of the same reasons that custom RZR cages are so popular, including: improved safety, lowered roof height (to fit into toy haulers & trailers), customized appearance and to meet UTV racing safety regulations.
Thunderhawk Performance now offers RS-1 roll cage bung kits for the do-it-yourselfer which feature strong machined steel construction (not weak cast iron) and are chamfered for superior weld adhesion and lower weld-bead profiles. Designed to fit tubing with 1.75" OD x 0.095" wall thickness, so you can build a safe roll cage for recreational use or to meet UTV racing requirements without adding unnecessary weight.
We've all seen RZR's with electrical wiring tie-wrapped to the roll bar to reach the roof. Although this works, it's ugly and it leaves these wires exposed to damage. Wiring electrical accessories and lights on the roof is common as people add light bars, stereos, interior lighting, overhead mounted accessories and the S&B Particle Separator. Thunderhawk Performance offers this RS-1 Roll Cage Bung Kit with four cage bungs drilled for wiring. This allows you to use two drilled bungs at the front A-pillar and two more at the center B-pillar position to easily route electrical wires through roll cage tubes for hidden (and protected) wiring. By including four drilled cage bungs, you will avoid having to run all wiring all up to the front A-pillar and then try to fit all the wires through just two drilled bungs. This makes life much easier for both current and future electrical add-ons.
This is a 6-piece kit that includes four (4) drilled cage bungs, two (2) single-bolt rear cage bungs and all necessary mounting hardware to fit the RS-1. Fits 1.75" x 0.095 steel tubing. Made in USA.